C Type Flex-Flex Couplings
The C Type coupling includes two flex hubs, one sleeve and one accessory kit consisting of seals and snap rings.
CFR Style Flex-Rigid Couplings
The CFR Type coupling consist of one particular flex hub, one particular rigid hub, a single sleeve, 1 accessory kit consisting of seals and snap rings.
Options
Straightforward and economical style of gear coupling
All steel sleves and hubs
Reinforced rubber seals with snap rings to hold lubricant in spot
Out there as vertical and horizontal couplings
Broad selection of unique variations which include full-flex, flex-rigid mill motor
Conventional configurations can be found from the shelf
Ordering Information
Application: Driver and Driven.
Variety and dimension of coupling, horizontal, vertical and so on.
Energy: Motor horspower or torque requirement.
Velocity: Motor RPM or Driven RPM.
Distance involving shaft ends (BSE).
Shaft sizes.
C and CFR Type Couplings
Ordering Details
Puller Holes are normal on sizes four as a result of twelve.
Puller Holes are available for sizes 7/8 by way of three.5 at an extra charge.
The BSE (distance Amongst Shaft Ends) could vary in between G and G1.
Interference bores with no set screws are regular unless otherwise specified.
Inch bores and keyway tolerances conform to ANSI / AGMA 9002-B04.
For metric bores and keyway tolerances, consult Engineering Part.
Larger sizes can be found, please talk to Technical Help.