DC MOTOR PUMP GROUP one
Standard Description
Consisting of the heavy duty DC motor and the CB1S gear pump, this pump motor group is an best hydraulic electrical power unit for mobile hydraulic equipments, such as automobile carriers, mobile aerial lifts, and backup techniques.
DC MOTOR PUMP GROUP two
General Description
This motor pump includes four.5″ DC motor, a CBSR gear pump with built-in relief valve and verify valve.
DC MOTOR PUMP GROUP three
Basic Description
This motor pump consists of a four.5″ DC motor and a CBSR gear pump which has a normal energy up/gravity down circuit which has a relief valve, a check valve and a solenoid release valve.
Particular Notes
1. This electrical power unit is of S3 duty cycle, i.e., non-continuous operation, 30 seconds on and 270 seconds off.
two. Clean each of the hydraulic components concerned ahead of mounting the power unit.
3. Viscosity with the hydraulic oil shoud be 15~68 cst, which must also be clean and cost-free of impurities. N46 hydraulic oil is recommended.
4. The energy unit must be mounted horizontally.
5. The relief valve stress is preset about 25% larger compared to the working pressure.
6. Flow manage valve for lowing pace adjustment is accessible unpon request.