Contact Us

WhatsApp:+8613083988828

Fax:+86-571-88220651

Mail:hzptcorp@gmail.com

Add:Shenhua Road, Hangzhou, Zhejiang, China

Home > News > Content
Maintenance Of Stainless Steel Chain Jul 01, 2019

- tightening of the chain (the chain is jammed into the front gear disc).


- noise generated when the driveline is running.


- the chain can be heard gurgling in the tunnel or through an object. (this means the chain is too dry)


Maintain at least once a month or every 250 km (150 miles) on normal roads; Driving on cross-country roads,


Clean and maintain at least every 100 kilometers (60 miles).


clean


- clean your chain after each ride, especially in rainy and humid conditions.


- be careful to use a dry cloth to wipe the chains and accessories.


- if necessary, use an old toothbrush to clean the gaps between the chains.


- also don't forget to clean the front and rear transmission guide wheels.


- remove dirt and dirt from the chains with a brush, assisted by warm soapy water if necessary.


- do not use strong acid or alkaline cleaners (such as rust removers), as these chemicals can damage or even break chains.


- do not use a chain washer with added solvent to clean the chain, which will definitely damage the chain.


- avoid the use of organic solvents such as stain remover, which will not only damage the environment but also wash the lubricating oil from the bearing area.


- clean your chain after each ride, especially in rainy and humid conditions.


- be careful to use a dry cloth to wipe the chains and accessories.


- if necessary, use an old toothbrush to clean the gaps between the chains.


- also don't forget to clean the front and rear transmission guide wheels.


- remove dirt and dirt from the chains with a brush, assisted by warm soapy water if necessary.


- do not use strong acid or alkaline cleaners (such as rust removers), as these chemicals can damage or even break chains.


- do not use a chain washer with added solvent to clean the chain, which will definitely damage the chain.


- avoid the use of organic solvents such as stain remover, which will not only damage the environment but also wash the lubricating oil from the bearing area.