Request a Brochure
and Samples
Roots Vacuum Pumps
Roots Vacuum Pumps Operating Principle and Features: The series SYF roots vacuum pump is with overflow valve. The figure-of-eight rotors are counter-rotating at a constant speed inside the pump housing for suction and exhaust of gas....
http://www.china-vacuum-pumps.com/vac/roots-vacuum-pumps.htm
Roots Vacuum Pumps
Operating Principle and Features:
The series SYF roots vacuum pump is with overflow valve. The figure-of-eight rotors are counter-rotating at a constant speed inside the pump housing for suction and exhaust of gas. Two rotors are supported by two bearings and synchronized by a gear, which ensures these two rotors in certain relative positions. They are near to one another and to the housing without actual contacting, so lubrication is unnecessary in the working housing. The carefully balanced operating parts and high precision bevel wheels ensue the pump be operated stably and continuously under the condition of high-pressure difference. Dynamic seal part use our patent technology and imported oil seals, the vibration amount of shaft on the shaft seals is controlled to less than 0.02mm.
A gravity valve is installed between the suction and exhaust part of the pump. The function of the gravity valve is as follows, when the pressure difference between the suction and exhaust part is over the weight of the valve, the valve opens automatically, which makes the pressure difference always keep in a fixed controllable value, the value is the allowable highest pressure difference to ensure the pump work normally and so that in fact, the roots vacuum pump with overflow valve is a kind of overload self-protective pump.
Series SYF roots vacuum pump with overflow valve has substantially higher speed at relatively lower inlet pressure and it is possessed overload self-protective function. Because it is a pump of dry clearance seal construction, if a certain pumping speed rate and an ultimate vacuum need to be obtained, it is necessary to supply a lower inlet pressure for reducing the back flow, therefore, a pump must be backed in use, roots vacuum pump should be started soom after its inlet pressure reaches a permissible value for economization.
It is permit to select different kinds of pump as the backing pump for factual requirements, such as oil seal pump and liquid ring vacuum pump. When pumping the gas containing large amount of vapor, the liquid ring vacuum pump is the ideal backing pump.
|
|
| SYF-150 | SYF-300 |
|
|
| SYF-600 | SYF-1200(Patent Product) |
|
|
| ZJP-1800(Patent Product) | ZJP-2500(Patent Product) |
Performance Parameter:
|
Model |
Ultimate Pressure |
Pumping Speed |
Pressure Diff.at Overflow Valve |
Inlet Diam. |
Outlet Diam. |
Motor Power |
Recommended Backing Pump |
Cooling Water Consumption |
Weight |
|
(Pa) |
(L/S) |
(Hpa) |
(mm) |
(mm) |
(Kw) |
(L/min) |
(Kg) |
||
|
SYF-30 |
30-2 |
30 |
52 |
50 |
40 |
0.75 |
2H-8 |
/ |
85 |
|
SYF-70 |
30-2 |
70 |
52 |
80 |
50 |
1.1 |
2H-15 |
/ |
110 |
|
SYF-70D |
30-2 |
70 |
48 |
100 |
100 |
1.5 |
2H-15 |
20 |
220 |
|
SYF-150 |
30-2 |
150 |
48 |
100 |
100 |
2.2 |
2H-30 |
25 |
220 |
|
SYF-300 |
30-2 |
300 |
58 |
150 |
150 |
4 |
2X-70,2H-70 |
30 |
310 |
|
SYF-600 |
50-2 |
600 |
32 |
200 |
200 |
7.5 |
H-150,HGL-150 |
35 |
790 |
|
SYF-1200 |
50-2 |
1200 |
44 |
250 |
200 |
11 |
H-150,HGL-150 |
40 |
950 |
|
ZJP-1800 |
50-2 |
1800 |
32 |
250 |
250&200 |
15 |
2-HG150,ZJP600/HG150 |
50 |
1200 |
|
ZJP-2500 |
50-2 |
2500 |
44 |
320 |
320&250 |
18.5 |
2-HG150,ZJP600/HG150 |
60 |
1500 |
Series ZJ-150A Roots Vacuum Pumps
|
Model |
Uitimate |
Pumping |
Inlet/Outlet Dia(mm) |
Max.Permiss able Diff.Pressure |
Motor Power（kw） |
Recom-ended Backing Pump |
||
|
Pressure |
speed(l/s) |
|||||||
|
Pa |
Torr |
Pa |
Torr |
|||||
|
ZJ-150A |
50-2 |
3.70-4 |
150 |
100/100 |
803 |
75 |
2.2 |
2H-30A |
Series ZJ-300 Roots Vacuum Pumps
|
Model |
Uitimate |
Pumping |
Inlet/Outlet Dia(mm) |
Max.Permiss able Diff.Pressure |
Motor Power（kw） |
Recom-ended Backing Pump |
||
|
Pressure |
speed(l/s) |
|||||||
|
Pa |
Torr |
Pa |
Torr |
|||||
|
ZJ-300 |
50-2 |
3.70-4 |
300 |
150/150 |
603 |
45 |
4 |
2H-70A |
|
10-1 |
80-4 |
H-70B |
||||||
Series ZJ-600 Roots Vacuum Pumps
|
Model |
Uitimate |
Pumping |
Inlet/Outlet Dia(mm) |
Max.Permiss able Diff.Pressure |
Motor Power（kw） |
Recom-ended Backing Pump |
||
|
Pressure |
speed(l/s) |
|||||||
|
Pa |
Torr |
Pa |
Torr |
|||||
|
ZJ-600 |
50-2 |
3.70-4 |
600 |
250/150 |
4.503 |
40 |
7.5 |
2H-70A |
|
10-1 |
80-4 |
H-150 |
||||||
Series ZJ-1200B Roots Vacuum Pumps
|
Model |
Uitimate |
Pumping |
Inlet/Outlet Dia(mm) |
Max.Permiss able Diff.Pressure |
Motor Power（kw） |
Recom-ended Backing Pump |
||
|
Pressure |
speed(l/s) |
|||||||
|
Pa |
Torr |
Pa |
Torr |
|||||
|
ZJ-1200B |
10-1 |
80-4 |
1200 |
250/200 |
403 |
30 |
11 |
H-150 |
|
50-2 |
3.70-4 |
ZJ300/2H-70A |
||||||
Series ZJ-5000 Roots Vacuum Pumps
|
Model |
Uitimate |
Pumping |
Inlet/Outlet Dia(mm) |
Max.Permiss able Diff.Pressure |
Motor Power（kw） |
Recom-ended Backing Pump |
||
|
Pressure |
speed(l/s) |
|||||||
|
Pa |
Torr |
Pa |
Torr |
|||||
|
ZJ-5000 |
50-2 |
3.70-4 |
5000 |
400/320 |
303 |
22.5 |
45 |
ZJ1200/H-300 |
Series ZJ-10000 Roots Vacuum Pumps
| Model | Uitimate | Pumping | Inlet/Outlet Dia(mm) | Max.Permiss able Diff.Pressure | Motor Power（kw） | Recom-ended Backing Pump | ||
| Pressure | speed(l/s) | |||||||
| Pa | Torr | Pa | Torr | |||||
| ZJ-10000 | 50-2 | 3.70-4 | 10000 | 500/400 | 2.503 | 19 | 55 | ZJ1200/H-300 |
Series ZJ-20000 Roots Vacuum Pumps
| Model | Uitimate | Pumping | Inlet/Outlet Dia(mm) | Max.Permiss able Diff.Pressure | Motor Power（kw） | Recom-ended Backing Pump | ||
| Pressure | speed(l/s) | |||||||
| Pa | Torr | Pa | Torr | |||||
| ZJ-20000 | 50-2 | 3.70-4 | 20000 | 630/500 | 203 | 15 | 75 | ZJ5000/ZJ1200/H-150 |
Series ZJP-30A Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia. |
Motor Power(kw) |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
(mm) |
||||
|
ZJP-30A |
5/10-2 |
3.7/10-4 |
30 |
4/103 |
30 |
50/40 |
0.75 |
2H-8 |
Series ZJP-70A Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia.(mm) |
Motor Power(Kw) |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
|||||
|
ZJP-70A |
5/10-2 |
3.7/10-4 |
70 |
4/103 |
30 |
80/50 |
1.1 |
2H-15 |
Series ZJP-150 Roots Vacuum Pumps
|
Moter |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia.(mm) |
Motor Power（kw） |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
|||||
|
ZJP-150 |
50-2 |
3.70-4 |
150 |
403 |
30 |
100/100 |
2.2 |
2H-15,2H-30A |
Series ZJP-300 Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia.(mm) |
Motor Power（kw） |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
|||||
|
ZJP-300 |
50-2 |
3.70-4 |
300 |
403 |
30 |
150/150 |
4 |
2H-30A,2H-70A |
Series ZJP-600 Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia. |
Motor Power（kw） |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
(mm) |
||||
|
ZJP-600 |
50-2 |
3.70-4 |
600 |
2.703 |
20 |
200/200 |
7.5 |
2H-70A |
Series ZJP-1200B Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Val |
Inlet/Outlet Dia. |
Motor Power（kw） |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
(mm) |
||||
|
ZJP-1200B |
50-2 |
3.70-4 |
1200 |
2.703 |
20 |
250/200 |
11 |
ZJ300/H-70B |
Series ZJP-2500 Roots Vacuum Pumps
|
Model |
Uitimate Pressure |
Pumping speed(L/S) |
Diff.Permiss at overflow Value |
Inlet/Outlet Dia. |
Motor Power（kw） |
Recomm-ended Backing pumps |
||
|
pa |
Torr |
pa |
Torr |
(mm) |
||||
|
ZJP-2500 |
50-2 |
3.70-4 |
2500 |
2.703 |
20 |
320/320 |
22 |
ZJ600/H-150 |
FAQ：
1.CAN YOU DO CUSTOMIZED PRODUCTS?
Yes,we are mainly doing customized products according to the customers’ drawings or samples.
2.HOW MANY EMPLOYEES OF YOUR COMANY?WHAT ABOUT THE TECHNICISTS?
We now have more than 650 employees, including 10 engineers and 50 technicians.
3.HOW TO DELIVER THE GOODS TO US?
Usually we will ship the goods to you by sea,because we are in Ningbo,and we are only 35 kilometers away from the Ningbo Port,it is very convenient and efficient to ship goods to any other countries.Of course,if your goods are very urgent,the Ningbo Airport and Shanghai Airport are also very nearby.
