Request a Brochure
and Samples
DRUM MOTOR Ø113 FOR BELT CONVEYOR
. TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
•
Asynchronous motor AC Three
motor AC Threephase. • .
Insulation F Class.Insulation F Class.• .
Lifetime Lubrication with SAE 68 oil..
Lifetime Lubrication with SAE 68 oil.• Free Maintenance.Free Maintenance.• .
Integral Thermal Protection (Bimetallic contact)..
Integral Thermal Protection (Bimetallic contact).• Planetary Gearbox with Gear Rim Planetary Gearbox with Gear Rim gears in Polymer or Steel.gears in Polymer or Steel.• Protection IP 66.• .
Ambient Temperature +5ºC / + 40ºC.Temperature +5ºC / + 40ºC.AVAILABLE OPTIONS
AVAILABLE OPTIONS
•
Zinc Coated Steel Shell.
Zinc Coated Steel Shell.• .
ANSI 304 Stainless Steel Shell..
ANSI 304 Stainless Steel Shell.• Geometry of Tube Geometry of Tube •
Rubber Lagging TubeRubber Lagging Tube•
Special Voltages of Motors..
Special Voltages of Motors.• .
Special Oil for Low Temperatures or Food grade Oil..
Special Oil for Low Temperatures or Food grade Oil.• Different possibilities of Cable Connection.Different possibilities of Cable Connection.APPLICATIONS
•
Light Conveyors.• .
Special Machines.Special Machines.• .
Packaging Machines..
Packaging Machines.STANDARS •
EN 60034 - 1. • CE.Diámetro : Ø113 mm
Velocidades : desde 3,6 hasta 6 hasta ,Longitudes : desde 256 hasta hasta Rated Speed : from Rated Speed : from
Shell Length : from 25
Shell Length : from 25TECHNICAL CHARACTERISTICS
TECHNICAL CHARACTERISTICS
motor AC Three
motor AC Three-phase or Single.
Insulation F Class.Insulation F Class..
Lifetime Lubrication with SAE 68 oil..
Lifetime Lubrication with SAE 68 oil.Free Maintenance.Free Maintenance..
Integral Thermal Protection (Bimetallic contact)..
Integral Thermal Protection (Bimetallic contact)..
Planetary Gearbox with Gear Rim
.
Planetary Gearbox with Gear Rim type Polymer and gears in Polymer or Steel.gears in Polymer or Steel..
Temperature +5ºC / + 40ºC.Temperature +5ºC / + 40ºC.AVAILABLE OPTIONS
AVAILABLE OPTIONS
Zinc Coated Steel Shell.
Zinc Coated Steel Shell..
ANSI 304 Stainless Steel Shell..
ANSI 304 Stainless Steel Shell..
Geometry of Tube
.
Geometry of Tube - Crowded , Cylindrical, etc…
Rubber Lagging Tube
Rubber Lagging Tube.
Special Voltages of Motors..
Special Voltages of Motors..
Special Oil for Low Temperatures or Food grade Oil..
Special Oil for Low Temperatures or Food grade Oil.Different possibilities of Cable Connection.Different possibilities of Cable Connection..
Special Machines.Special Machines..
Packaging Machines..
Packaging Machines.6 hasta
6 hasta 63 m/min
hasta
hasta 1.200 mm Diameter : Ø113 mm Rated Speed : from
Rated Speed : from 3,6 until 63 m/min
Shell Length : from 25
,Shell Length : from 256 until 1.200
e e 0 550 600 650 2 8.6 8.9 9.3a e e USAGE PRECAUTIONS
• Don’t overstress the belt: The belt has to be just stressed to push the Don’t overstress the belt: The belt has to be just stressed to push the load without to slide. • Obligatory to connect the Thermal Protection.Obligatory to connect the Thermal Protection.• .
Don’t work without belt, ask to our technical department..
work without belt, ask to our technical department.• , Allowed for mounting horizontally. , Allowed for mounting horizontally. • .
Handle with case. Don’t lift with cable.. Handle with case. Don’t lift with cable.• . .
Allow a gap of 0.3/0.5mm between end
. .
Allow a gap of 0.3/0.5mm between endOPTIONS
• Rubber Lagging for standard Rubber Lagging for standard •
Food-grade Oil (EU, FDA and USDA)..
grade Oil (EU, FDA and USDA).• -, Low temperature oil., ACCESSORIES • Mounting brackets. • .
Idler pulleys or rollers.Idler pulleys or rollers.• Frequency inverters.800 > 1200 11.3 0.45 Kg x 50mmDon’t overstress the belt: The belt has to be just stressed to push the Don’t overstress the belt: The belt has to be just stressed to push the Obligatory to connect the Thermal Protection.Obligatory to connect the Thermal Protection..
work without belt, ask to our technical department..
work without belt, ask to our technical department., .
Allowed for mounting horizontally.
, .
Allowed for mounting horizontally. Ask for other positions. .
Handle with case. Don’t lift with cable.. Handle with case. Don’t lift with cable.. .
Allow a gap of 0.3/0.5mm between end
. .
Allow a gap of 0.3/0.5mm between end-cap faces and brackets. Rubber Lagging for standard
Rubber Lagging for standard belts.
grade Oil (EU, FDA and USDA)..
grade Oil (EU, FDA and USDA)..
Idler pulleys or rollers.Idler pulleys or roller
