MOTOR WORM GEARBOXES FOR GREENHOUSE GW40 CHAIN COUPLING

MOTOR WORM GEARBOXES FOR GREENHOUSE GW40 CHAIN COUPLING 

Gear Motor Reducer make use of drive systems of greenhouses and livestock houses, which has outstanding features and competitive price. As the professional gear motor manufacturer, the gear motor reducer is a kind of greenhouse pulling screen system, which is easily installed. The main transmission components made from the rack and pinion, rack and pinion mechanism 

Features:

1, Compact structure, easy to installation and operation, long life span.

2, Install limit switch and emergency limit switch for reducing failure impact.

3, Low noise and beautiful apperance.

4, Widely used in greenhouse shading system and open window system.

As a standard the GW40 is fitted with a chain coupling set with a duplex chain 

according to DIN chain number 10B-2. The sprocket wheel joint is available for 1”, 5/4” 

or 2” drive tubes. Attachment of the motor gearbox is possible at the side or base. 

The motor casing and the rear motor bearing plate consist of Sendzimir-galvanized sheet steel, the shell magnets are made of sintered metal material and the gearbox is a zinc die-casting.

The armature shaft has a sintered metal bush bearing on the motor side, and the gear side bearing, mounted in the bottom of the gearbox, is either a ball bearing or a sintered metal bush bearing. The end play of the armature is set by means of an adjusting screw. 

The worm wheel is made of plastic or resinbonded fabric and the shaft runs in a sintered metal bush bearing. 

The grease-filled gearbox is sealed by means of a sheet steel cover and seal. 

Electrical connection is carried out by means of leads or spade terminals.. 

Use: General machine construction, automatic machines, agricultural technology, business machines, Laboratory appliances, medical appliances, traffic and communications technology, photographic/optical equipment