Water pumps come in handy in the home and construction industries because they are important to all sectors of the economy.Water pumps are used even in agricultural production.When it fails, it can cause a lot of stress.This is why many people attach great importance to this device.

The water pump applies the same principle as the internal combustion engine, it uses Pulley Methods of producing and pumping water.Therefore, you need to be extra careful with the water pump to avoid coolant leakage.

The coolant level determines how the pump works.If the coolant level drops, the pump will burn out quickly.A pump failure caused the engine to stall.So how to remove the faulty water pump pulley from the water pump?

First of all, in order to remove the malfunctioning water pulley from the pump, the most important thing is to clear any areas of impending structure.Start with housing and other things.Press down on the tensioning belt to maintain good slack on the pulley so that it is firmly fixed in place.

In the second step, check all the sprockets used as timers on the pump.Close observation will reveal whether the movement of the timer is clockwise or counterclockwise.Please always keep in mind that they are the real key to the function of your pump.

take out Pulley  From the main body.You can let it loose or remove it completely.But in most cases, it's best to stay in the air, except in extreme situations where you have no choice.

Next is the timing belt or chain.This chain or belt is very important because it carries the mainspring of the pump through the passage of the interlocking teeth.Be sure to pay attention to the direction of each interlocking tooth.

The last step is to remove the water pump belt from the pump itself.You don't have to remove the entire belt, just make sure it is loose enough to remove the pump.

Use a pulley tool as this puts pressure on the shaft and pulls it down pulley. Gradually tighten the remover, which will rotate the screw onto the rotor and its side clamps.This will also allow the pulley to fall off without being damaged or bent.

This is mainly due to the evenly distributed pressure.As long as you keep your pressure balanced, you will have no problem  Pulley  Broken or bent.

Okay, then congratulations.