How to adjust the tractor clutch

The artisan lawn tractor is equipped with an electronic clutch, which includes a brake to stop pulley After the set time.This internal brake may wear out with use.Symptoms of clutch wear include lawn mower blades not engaging or stopping when you want them to stop.You can adjust the following Tractor clutch To compensate for this wear.The adjustment of the clutch can be done by identifying the relevant components and modifying them.

      1. Place the ignition switch in the "off" position and turn off the lawn mower.Make sure that the connecting clutch is also in the "off" position.

      2. Identify the clutch plates, grooves, brake pads and nylon lock nuts.The clutch disc is pressed on the rotor, and the rotor, the clutch disc and the brake disc are tied together with a nylon lock nut.

      3. Adjust the three nylon lock nuts so that the space between the clutch plate and the rotor is 012 inches at the three slots on the side of the brake plate.

      4. Run the tractor at full throttle and engage and disengage the clutch several times before the test to see if your adjustment reduces the symptoms of wear.If necessary, re-measure and tighten the nylon lock nut.