Request a Brochure
and Samples
Double-Acting 12 Volt DC Electro Hydraulic Power Unit
Open Frame Mount we provide useful tools to the outdoor living industry at affordable prices. Our customers know the best way to get something done right is to do it themselves, and we're well aware they need the best tools to get the job done fast at a reasonable cost to save money for...
Double-Acting 12 Volt DC Electro Hydraulic Power Unit
Double Acting Power Unit
Equipped with a high pressure gear pump, a DC motor, a multi-functional manifold, valves and tank, this power unit has a power up - Power down circuit. Start the motor to lift the machine. Control raise and lower with cable controller It is widely used in tipper trailer, fork lift and scissor lift applications where the ability to apply hydraulic fluid pressure to both working ports of a cylinder is necessary. (instead of a "gravity down" system where the weight of the machine attached to the cylinder is enough to gravity feed down). There are unlimited uses for this product.
Specifications
Tank: Steel, 3 liters
All ports are #6 SAE O-ring boss
Motor: 2.0 hp, 12v, 2600 rpm, S3 Duty
Max Pressure = 2900 psi (20Mpa)
Gear Pump: .128 Cu In/rev
System Relief valve: 2500 PSI
Solenoid Release Valve: 12VDC, NC
These units are high quality and are used in many OEM applications. We have direct factory support for any questions or parts.
Remote: 2 Button, 3 lines, 10 feet-1/2
Trouble shooting guide available upon request.
All spare parts available
Hydraulic Fluid:
ISO viscosity grades 22 to 46 are recommended. Anti wear, antifoaming & rust inhibitor additives are recommended.
For colder climates ATF can be used
In extreme cases Mil-5606 fluid can be used
Do not use synthetic, biodegradable or water base hydraulic fluids. In most cases these fluids are not compatible with Buna O-rings. Please check fluid compatibility before use.
Tractor hydraulic fluid is not recommended. Most tractor hydraulic fluid has to high of a viscosity & may not be compatible with Buna O-rings.
Recommended Fluid Viscosity Specifications:
ISO Viscosity Grades 22-46
cSt @ 40°C 22-46
cSt @ 100°C 4-8
Recommended Fluid Maintenance:
Change hydraulic fluid after initial 100 hours of operation
Change hydraulic fluid every 3000 hours or 2 years there after
Check hydraulic fluid level regularly before operation
Tank dimensions are 7-3/4"wide x 8-1/2"tall x 12" long (fill port is 1" tall on tank)
The business was built from scratch by a few friends originally brought together by previous careers in the farm & agriculture industry and through outdoor adventure trips across the wild American west. We started from nothing and have been growing steadily ever since. The blood and sweat we've put into Tool Tuff has given us the experience to offer unbeatable customer service and the flexibility to offer customized products and solutions
