900 SERIES Transmission Drive Chain Pintle CHAINS, sometimes referred to as “sugar mill” or “intermediate carrier chain” is utilized extensively in sugar mills. Multiple strands of 900 Pintle Chain, available with a couple of holes per link, could be installed with overlapping beaded carrier slats to form a continuing apron conveyor for intermediate carrier services.
The pin holes at the closed end of the 900 Class link are provided with smooth bushings which are press-fitted in to the links and keyed into place. The bushings are renewable and will be driven out and replaced when they become worn. 900 Class Pintle Chain is designed with dual barrels, one on each aspect of the open up end of the links, to support double sprockets. The objective of this driving technique is to get rid of the possibility of materials build-up in the sprocket get in touch with area, which often causes the chain to leap the sprocket. Weighty ribs rigidly reinforce these generating barrels.
Our 900 Course chain links, with tensile power from 22,500 to 32,500 pounds, can be found with large sliding surfaces to lessen chain wear and prolong chain life. Broad wearing surfaces and large cross sections synergy to provide a considerable link which is manufactured according to manufacturer’s specifications and will perfectly replace links made by other manufacturers.
Brutaloy sprockets for 900 Class Pintle Chain are plentiful in 3.170 inches. 900 Class Pintle Chain should only be permitted to travel in one direction; links should always run in direction of their closed narrow end.
Available in cottered construction just, 900 Class Chain is usually assembled with T-headed pins which are locked into place by two lugs cast upon the ends of the traveling barrels to avoid pin rotation. Pin rotation during procedure would lead to wear within the bushing. Both mind of the pin and the cottered end of the pin are secured by cast lugs on the barrel end of the links.
Material
900 Class Pintle Chain are links cast of malleable iron or Promal (Duramal). It is furnished with carbon metal heat treated pins and carbon steel case hardened bushings as standard. However, stainless steel pins and bushings could be provided when specified.