Variable Speed – Adjustable Pulleys
Also referred to as: Hand Adjustable Pulleys, Stationary Adjustable Pulleys, Variable Pitch Pulleys, Adjustable Pitch Pulleys, Variable Speed Pulleys.
These variable pulleys are perfect for low power applications when a small variation in speed may be needed or the drive has to be trimmed after installation.
Adjustable pulleys contain two parts, a fixed half that is secured to the motor shaft, and an changeable half. The fixed 1 / 2 has a finely threaded boss onto which the adjustable one half is mounted. Adjustments are made by screwing the adaptable half towards or away from the fixed one half, effectively changing the pitch diameter of the pulley. Adjustment may be made in increments of 1 quarter of a flip. When at the required setting the movable 50 percent is locked into posture with a placed screw which must be aligned with a slot in the boss to prevent damage to the threads.
There are two types of tensioner pulleys offering the tension upon an engine’s accessory belt or belts. One type is certainly self-adjusting; the other needs manual adjustment. The self-adjusting pulley is usually spring-loaded and provides its tension. The other requires adjustment with a bolt that is on the side, top or bottom of the pulley. Only the latter kind of tensioner pulley may be altered.
Adapt your machinery to the strictest of expectations with variable pitch sheaves from USA Roller Chain. Our variable velocity V-belt pulleys support applications with drive-rate refinements, including pumps, supporters, blowers and more. Stop fretting about adjustment frustrations because an adjustable V-belt pulley from our share is simple to work with in any application. Slide the variable drive pulley onto your machine, and change it from that point forward. Speed modifications are part of the pulley’s design benefits. The secret is at the threaded, angular faced discs that will be the main of the V-shaped groove on each pulley. If you need more speed, maneuver the discs toward one another. This alignment produces a belt that easily rides larger in the groove. Achieve a more substantial pitch diameter than before with this adjustment. Meet every requirement in your sector by slowing the machinery right down to a particular rate. Simply boost the space between the two discs, which slows down the belt’s motion. At EVER-POWER, our variable pulleys provide you with the necessary versatility to refine your machinery and move forward with a productive working day.

The Ever-power Adjustable Pulley is the perfect machine for all over training and conditioning.

The fully height-adjustable pulley allows a huge range of multi-joint, isolation and core exercises to be performed.

The Ever-power Adjustable Pulley is ideal for sport-related training as well as rehabilitation work.

Any standard wire attachments in addition to our range of thick-grip attachments can be clipped onto the cable and the 100 kg weight stack offers lots of resistance even for advanced athletes.

The Ever-power Adjustable Pulley is an versatile, space-efficient machine that every gym should have.

We also have a traditional Huge Pulley / Low Pulley release of this machine.

Want to employ your cable equipment for low rows? In that case check out our catalogue.

We recommend this equipment is bolted down or among our wall brackets are used – please ask for details when ordering.
We offer Adjustable Cam Pulleys for Volvo 8v / 16v and BMW M20 engines. Nuke Efficiency Cam Pulleys allow for fine tune changes to cam timing to increase performance. The pulley is certainly hard anodized for an extended lasting life and so are made with the same quality and finish as all our overall performance parts.
We use hard washers to be sure optimum function at all period and the three M6 bolts are fastened with helicoil inserts for long durability.
Adjustable V-belt pulleys
High quality
Various adjustable types
Available from stock
Brands: Ever-power
Adjustable V-belt pulleys
V- belt pulleys suit V-belt so that transmitting arises by friction between your inclined sides of the belt and the pulley itself.
Material: cast iron EN-GJL-250 UNI EN 1561.
Due to our large assortment, there is nearly always a product that’s ideal for your applications. We not only supply drive elements, but also the rest of the products needed to achieve an optimal process. In our stockpile we possess, for example, various types of transport components, hydraulic components, oil coolers and our own monitoring program the Beegle. Do you want to know more in regards to a product or do you have a question? Our particular sales engineers will end up being happy to help you find the best product needed for you technical difficult task. Feel absolve to contact us for those who have issues or seek information.