Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Description: New fan motor, removed from unused 18” or 24” China Air Compressor diameter TPI fans. Designed to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor comes with a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric motor, capacitor and quickness control change is still installed nevertheless the cord itself is generally detached as seen in the photos. (Find “Control Notice” below for modify type.)
T (See “Program Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (not including the shaft). The engine shaft can be½” (0.500″) diameter x 2 ½” long with a collection screw clean. There are (4) threaded mounting lugs on leading of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually have got 4mm threads and to be on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to the next).
Rate: The approximate motor speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take notice: Motors may come with The 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). These two types of switches both control the engine in the same way (but you possess a rotating knob and you have a pull-chain). In the event that you order several engine at a time, we will do our better to supply your order with each one kind of control or the additional.
Application Note: USUALLY DO NOT use this electric engine in a nonfan software. This is a totally enclosed fan electric electric motor and made to have continuous ventilation over the motor casing for cooling. The housing isn’t vented and the electric powered motor will overheat and get into automatic thermal overload if operate in a nonfan system where there isn’t strong ventilation past the motor. (Caution Note: the electrical motor will restart immediately when it cools cool off.) Using this electric motor for applications aside from 18 & 24″ TPI fans may possibly also overload the electric motor and cause it to electric fan motor china proceed into automatic thermal overload. (Your lover blade from another producer may have a steeper blade angle.)
Origin: This electric motor is manufactured in China.