Fan Motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, removed from unused 18” or 24” China Atmosphere Compressor diameter TPI fans. Made to operate an 18” or 24” enthusiast blade (blade NOT included).
This motor includes a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring in the middle of your electric engine, capacitor and quickness control switch is still hooked up nevertheless the cord itself is generally detached as seen in the photos. (Find “Control Notice” below for change type.)
T (See “App Notice” below for utilize in a variety of other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is definitely½” (0.500″) diameter x 2 ½” lengthy with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” lengthy x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and also to end up being on a 117mm (4.6”)diameter circle (3 ¼” measured in one stud to the next).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Direction of rotation (facing the shaft end of the electric motor) is Clockwise.

Control Take Electric Fan Motor Notice: Motors will come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we’ve demonstrated BOTH variations in the images). Both of these types of switches both control the engine in the same way (but you possess a rotating knob and you have got a pull-chain). In the event that you order several engine at a time, we will do our best to supply your order with each one kind of control or the excess.
Application Note: Do NOT use this electric electric motor in a nonfan application. This is a completely enclosed fan electric electric motor and designed to have continuous ventilation over the electric motor casing for cooling. The housing isn’t vented and the electric motor will overheat and get into automatic thermal overload if operate in a nonfan plan where there isn’t solid ventilation past the motor. (Caution Note: the electric motor will restart instantly when it cools cool off.) Using this electrical motor for applications apart from 18 & 24″ TPI fans could also overload the motor and cause it to proceed into automated thermal overload. (Your companion blade from another producer may possess a steeper blade angle.)
Origin: This electric motor is manufactured in China.