Agricultural Gearbox
The agricultural gearbox is the main mechanical component of the kinematic chain of agricultural machines. It really is normally powered by the tractor power take-off via the PTO shaft and the gearbox drives. The operating torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, in addition to chain gears.
Agricultural gearboxes always have 1 input shaft and at least a single output shaft. If these shafts sit at 90° to each other, the gearbox is an ORTHOGONAL ANGLE gearbox or more typically called a right-angle gearbox.

rotary tiller gearbox is definitely adopted middle equipment transmission system, mounted with the tractor of 12-80HP. Tractor wheel tracks are totally protected after tillage as the functioning width is much wider. The product quality is reliable and the performance is well. So it can be used on dry and paddy field. It could decrease the time, laboring, and cost, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.e. the main one with the insight shaft, has the fewer number of teeth (pinion), hence the output shaft rotates slower gearbox for agricultural machinery compared to the input shaft.
It is named an increaser when the input shaft is mounted on the gear with the larger quantity of teeth (crown), hence the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of the teeth.
The gearbox is known as right-angle when it only has two shafts (input and output),
whereas it really is called a distributor whenever there are at least two output shafts.
It really is called a rotational reverse gearbox and parallel offset in the variations with parallel shafts with two gearboxes.

Speed change
in addition to the main pair of gears and relevant shafts, the gearboxes may also have other gears with a different amount of teeth. The apparatus shift of the primary couple of gears with the secondary ones allows different speeds. The manual change of the secondary gear pair with gears with different quantity of teeth allows modifications to the output rotation speed.
CMR GROUP will be able to design and produce also agricultural machinery applications.