Agricultural Gearbox
The agricultural gearbox is the main mechanical component of the kinematic chain of agricultural machines. It really is normally driven by the tractor power take-off via the PTO shaft and the gearbox drives. The working torque can also be transmitted to the gearbox by hydraulic motors or belt pulleys, furthermore to chain gears.
Agricultural gearboxes will have one input shaft and at least a single output shaft. If these shafts are positioned at 90° to one another, the gearbox can be an ORTHOGONAL ANGLE gearbox or more generally called a right-position gearbox.

rotary tiller gearbox is usually adopted middle gear transmission program, mounted with the tractor of 12-80HP. Tractor wheel tracks are completely covered after tillage as the functioning width is a lot wider. The quality is dependable and the overall performance is well. So it can be utilized on dry and paddy field. It can decrease the time, laboring, and cost, etc. during operation

Increasers and Reducers
When the gearboxes have both gears with different amounts of teeth.
The gearbox is a reducer when the driving gear, i.electronic. the one with the input shaft, has the fewer amount of teeth (pinion), thus the output shaft rotates slower than the input shaft.
It is named an increaser when the insight shaft is mounted on the gear with the larger amount of teeth (crown), thus the output shaft rotates faster compared to the input shaft.
Right-angle gearboxes, distributors or rotational reverse gearboxes
When the gearboxes have gears with the same number of tooth.
The gearbox is called right-angle when it only has two shafts (input and output),
whereas it is called a distributor when there are at least two output shafts.
It really is called a rotational invert gearbox and parallel offset in the versions with parallel shafts with two gearboxes.

Speed change
in addition to the primary pair of gears and relevant shafts, the gearboxes could also have other gears with a different amount of teeth. The apparatus shift of the main couple of gears with the gearbox for agricultural machinery secondary types enables different speeds. The manual change of the secondary gear pair with gears with different number of teeth allows adjustments to the output rotation speed.
CMR GROUP is able to design and manufacture also agricultural machinery applications.