The EP Greenhouse geared motor is a concise and lightweight reduction gear reducer with a limit switch system that’s ideal for assembly of a locally available electric motor. The gear reducer is utilized in manually-managed or climate-managed ventilation and display screen systems in greenhouses. The quick and easy-to-install EP gearbox can be rainproof and windproof. The geared motor has a high protection course (IP65) and can be utilized in an ambient temperature of 0-60 °C.

The low-noise geared motor for Greenhouse has a gearwheel transmission and a worm wheel transmission, which are integrated in an aluminum precision housing. The self-braking worm wheel transmission ensures that the drive shaft is locked when the decrease geared motor isn’t running. The completely sealed reduction gear driver has an expansion chamber with a diaphragm to keep the gear oil at a minimal pressure under all situations, even at high temperature ranges. Thanks to the utilization of an expansion chamber, the gear motor could be installed in any position. There are no restrictions, because there is no dependence on a bleed plug. The sealed reduction gearbox keeps the gear essential oil of the gearbox in optimum condition because of its entire operating lifetime. The gear driver is suitable for discontinuous use, operating class s3-30%, with a maximum activation period of 25 minutes.

The Gear box reduction geared motor has an FT85 motor assembly flange, on to which the right IEC standard motor can simply be installed (EN 50347).

The Gear box includes a rotating limit switch system with operating switches and circuit breakers (NC contacts) for turning off at the end positions. The limit change system is installed within an built-in chamber and is certainly enclosed by an impact-resistant plastic cover. The limit switch system is obtainable and simple to adjust. The limit change system’s maximum switching range is 40 or 64 revolutions of the drive shaft. The cabling is linked in spring-clip connections. The reducer has an IP68 M16 x 1.5 cable gland (5-9 mm cable) for the cable feed-through.

The reducer for greenhouse includes 16 teeth 5/8”x3/8” sprockets, keys and fasteners. The accompanying chain couplings and assembly plates are available as accessories.

Optimum drive torque of 150 Nm or 450 Nm.
Rotational speeds of 3 or 5 rpm for a mains frequency of 50 Hz or 3.6 or 6 rpm for a mains frequency of 60 Hz in case of program of 4-pole electric motor.
Protection class IP65.
May be used in ambient temps of 0-60°C.
Ideal for discontinuous use, operating class s3-30%, maximum activation time 25 minutes.
Equipped as standard with 16-tooth galvanised chain coupling 5/8″x3/8″.
FT85 motor assembly flange for installing IEC standard motor (EN 50347).
Maximum switching range of limit switch program 40 or 64 revolutions of the drive shaft.
IP68 M16x1.5 cable gland for cable feedthrough (5-9 mm cable).