Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high swiftness, low torque sources to deliver decreased speeds at increased torques. The input aspect has standard SAE pads for engine mounting. Obtainable in the three output configurations proven below. Many units can be furnished with an integral parking brake.
Single reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input quickness is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power transmission efficiency.

Wheel Drive
Input side has standard SAE pads and splined input. Output aspect has hub for mounting vehicle wheel. Free wheel can be done by using the spring disconnect to disengage the drive shaft. The disengage feature is certainly regular on all wheel drives.

Shaft Output
Input side regular SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.

Spindle Drive
Input side is regular SAE pads with splined insight. Output side has a flanged spindle for coupling to the load.

Swing Drives
Ever-Power model 6 is offered with or without essential parking brakes. The “SW” Power Wheel offers extra-huge tapered roller bearings, a ductile iron hub and high temperature treated ring equipment to reduce backlash growth Plastic Gear Rack caused by wear. The exterior bearing nut provides the ultimate in shaft retention and shaft power. Output could be a spindle shaft or various sizes of essential pinion gears.