Our direct supply chain to Martin Sprockets factories gets a wider range of QD Bushings delivered at the right time at the right price.
Taper bushing are trusted together with sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature is certainly easy to make use of and needs no additional alteration. These bushings can match almost all kinds of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: full selection of both qd bushing china metric and imperial obtainable.
Standard range fits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range available, for compact lightweight assemblies & Clean, Compact Style.
Ease of installation and removal.

Our immediate supply chain to Martin Sprockets factories gets a wider selection of QD Bushings delivered at the right time at the proper price.
Taper bushing are trusted as well as sprockets, v-belt pulleys, timing pulleys, coupling and other mechanical parts with taper bore connections.
Taper bushing series are made of high quality engineered components with great tolerance. The feature can be easy to make use of and needs no additional alteration. These bushings can fit almost all sorts of assemblies and sizes. They are the best choice in style for mechanical connections.
No costly re-boring: full selection of both metric and imperial obtainable.
Standard range suits up to 125mm/5″ shafts & Hub diameter required depends on the application.
Complete brief reach range offered, for compact light-weight assemblies & Clean, Compact Style.
Simple installation and removal.
The original sheave and pulley installation system developed to facilitate installation and alternative of components.
The QD (Quick Detachable) design provides for both conventional (flange outboard) and invert (flange inboard) installation configurations.
1. Be certain the tapered cone surfaces of the bushing and the inside of the driven product are clean and free from anti-seize lubricants.
2. Slide QD bushing on shaft, flange end 1st. Assemble key.
3. Position QD bushing on shaft. Tighten arranged screw over key “hands tight” with standard Allen wrench only. Usually do not use excessive force.
4. Slide large end of sheave or sprocket taper bore into position over cone aligning drilled bolt holes in sheave or sprocket with tapped holes in flange of bushing. Assemble pull-up bolts and lock washers.
Take note: Install M thru S bushings in the hub so that the two extra holes in the hub are located as far as possible from the bushing’s noticed cut.
5. Tighten pull-up bolts alternately and evenly to tightness indicated in torque desk on back. Usually do not use extensions on wrench handles. There must be a gap between your encounter of the sheave or sprocket hub and the flange of the QD bushing to insure a satisfactory cone grip and press fit.
CAUTION: THIS GAP SHOULD NOT BE CLOSED.
Use a tapered or QD bushing from Ever-Power with sheaves, pulleys, sprockets and several other power tranny applications. Flanged quick-disconnect bushings feature a completely split style to greatly help provide easy installation and disassembly. A tapered bushing with directly edges uses an interior screw to help drive the bushing into the shaft, while a split taper includes a flange and a key on the bushing to greatly help provide more drive.
QD bushings (in . and metric sizes) have a flanged style and show a 4° taper with conventional or reverse installation. They are stocked in popular completed bore sizes and minimal plain bore for custom reboring.
Many people make reference to both types as a “taper lock” because they both use the tapered wedging action to lock to the shaft. The taper bushing, with it’s straight sides, runs on the set screw to drive the bushing into the bore of the component getting installed (sheave, sprocket, etc.). Be cautious when installing these screws. The holes with threads on the bushing are for removal only. Also remember that the looks of a flange on the outside of the bushing doesn’t indicate it’s a QD style. Split Taper bushing also offers a flange, and the two aren’t interchangeable. The QD style includes a split that continues through the flange. The Metal QD (Quick Disconnect) Type bushing offers versatile and easy set up while providing exceptional keeping power. QD Bushings are used thought out the industry offering convenience and design flexibility. They are precision machined of quality Steel and are set up by tightening several cap screws. This draws the bushing into the taper bore of the merchandise which compresses the bore of the bushing. QD bushings are often removed utilizing the cap screws as jack-screws. Double drilled holes are furnished in QD Bushings permitting mounting of product in the conventional or reverse positions. This enables cap screws to be installed through item hub or bushing flange whichever is definitely most convenient. A significant benefit in installation, cap screws are often inserted from the outside where they are easily accessible. QD Bushings can be found from stock with all popular bores within the range of every size bushing.
QD Bushings include a split tapered flange with the split central to the flange and taper. They are used on sprockets, sheaves, and pulleys where more clamping power is necessary over standard bored-to-size bushings. Quick-Disconnect Bushings are essential for installation v-belt drives, synchronous belt drives and roller chain drives.