All EPT shaft collars, including quick-clamping collars, are one point faced to make sure perpendicularity and proper alignment. This critical manufacturing stage assures precise shaft collar facial area to bore relationship leading to correct element positioning on the shaft and possibly pressure on interfaced ingredients.
Quick-clamping shaft Shaft Clamp china collars from EPT are made from high quality light weight aluminum with type-II sulfuric anodized finishes, with a dark-colored finish on the collar and a precious metal finish about the clamping lever for added visibility. Aluminum collars are corrosion tolerant, lighter than various other metals, have low inertia and also have non-magnetic properties. All EPT goods happen to be RoHS and REACH compliant. Available regular sizes for the quick-clamping shaft collars happen to be 0.375” to 1 1.5” in the inches series and 8 mm to 38 mm in the metric series.
Shaft Collar, System of Measurement In ., Shaft Locking Type – Couplings 1 Piece Speedy Clamp, Bore Type – Collars Plain Bore, Bore Dia. 3/8 In., Materials – Collars Black Anodized 6061 Aluminum, Exterior Dia. 1-1/2 In., Width .394 In., Clearance Dia. 1.496 In., Screw Size M3, Screw Material 18-8 300 Series Stainless Steel, Operating Temp. Selection -40 Degrees to 200 Degrees F, Benchmarks RoHS2 Compliant, REACH Compliant
The Shaft Collar 1×3/8, 1/2″ for Key Shaft is made of lightweight Aluminum, both piece design enables you to install these collars anywhere on a shaft without removing components. Furthermore to reducing the overall weight, the flats let you rotate a shaft without marring or gouging the shaft. Basically place the collar on the shaft and tighten both socket-head cap screws to safeguarded the collar and a wrench and become added to the collar’s flats to rotate the whole shaft/collar assembly.
Made of lightweight Aluminum
Enables you to install these collars anywhere on a shaft without removing components
Just place the collar upon the shaft and tighten the two socket-head cap screws to secure the collar
Flats let you rotate a shaft without marring
Climax Part C-056-S Set Screw Collar is made with T303 STAINLESS, which works well in corrosive environments. Measurements are 9/16 in. Bore, 1 in. OD, 7/16 in. Width. It is successful on hard and smooth shafts. This is a Cost effective collar design, and Without difficulty installed where significant disassembly would or else be required.
EPT quick clamping shaft collars collar clamp hinge acquire manufacturing 2 1 8 in steel,shaft collar clamp pressure manufacturing metal vex clamping design,vex clamping shaft collar collars one piece with lever clamp hinge,vex clamping shaft collar clamp 3d model making quick 1 3 8 in alum,EPT speedy clamping shaft collars collar clamp 2pc 1 in steel stainless split with lever,climax metallic s shaft collar two part clamp style EPT quick clamping collars 2laptop or computer 1 in steel push,clamp in shaft collars couplings universal clamping collar design with mounting holes 2pc 1 in metal,shaft collar clamp pressure clamping calculation quick connect collars at best cost in,clamp shaft collar clamping collars power calculation quick connect,stainless steel twice split shaft collar with quick clamping clamp hinge power calculation.
Black Oxide Plated Metal One-Piece Clamping Collar.
Recessed Screw Head has an outside surface free from main projections for safety.
Design completely engages the shaft without marring.
Greater axial holding electricity than placed screw collars.
Effective on hard & delicate shafts.
Indefinitely adjustable and easy to remove, one-piece clamping collars are typically applied to hard or delicate standard round shafts, more than a split hub or about thin wall tube. Through the use of friction to provide superior grip on pubs and shafts, one split collars present sturdier, more reliable results when compared to the set screw design of solid collars. They also offer tremendous axial electrical power, while minimizing shaft distortion for top-quality performance and decreased wear and tear.

The collar clamping mechanism works fast and successfully with simple hand opening of the integral clamping lever, positioning the collar on the shaft, and closing the lever flush with the outer surface of the collar. The design of the cam on the lever and the mating machined surface area on the collar assure a good fit with a optimum axial load of 35 to 120 lbs / 133 to 489 N depending on the collar bore size. In scenarios where higher holding vitality is normally or clamp axial load is required, the quick-clamping collar is not the recommended choice. EPT offers a total type of industry-leading one-part and two-part shaft collars made for these applications.