This standard range of Servo-Worm Reducers are perfect for use in applications that demand high performance, precise positioning and repeatability. These were specifically developed for make use of with state-of-the-art servo motor technology, providing limited integration of the electric motor to the unit. Angular backlash of less than 1 arc-mins is provided standard.
They can be purchased in four sizes (50 mm to 100 mm center range) with input boosts to 5,000 rpm, reduction ratios from 4.75 to 52:1 and output torque capacities up to 885 lb.ft. A wide selection of motor couplings and mounting flanges are for sale to assembly to practically all servo motors, and the hollow bore result can be used to mount output shafts, pinion shafts, or other drive elements.
Typical applications for these reducers include precision rotary axis drives, traveling gantries & columns, materials handling axis drives, zero-backlash axis drives and electronic line shafting. Industries served include Material Managing, Automation, Aerospace, Machine Tool and Robotics.
helical-worm servo gearmotors have a torque selection of 92 Nm to 520 Nm. As angular drives they are specially space-saving and decrease the expenditure for valuable set up space.
The helical-worm servo gearmotors were created in such a way that they guarantee you a low-noise system environment. Moreover, these gearmotors give you superb attenuation properties for the operation of your systems with low degrees of vibration. This is definitely due to the longitudinal program of drive on the insight shaft. This allows torque impulses to end up being prevented effectively and for optimum results with regards to running smoothness and noise reduction to be performed.
Both the equipment unit, and the synchronous servomotor are based on our modular program. This enables you to have fully individual configuration possibilities for each application. One matter is certain – Our servo gearmotors are real specialists for very particular requirements.
Wormwheel gearboxes go by several names, including 90-degree gearboxes, right position gearboxes, swiftness reducers, worm equipment reducers and worm drive gearboxes. Gear decrease boxes feature a gear arrangement in which a equipment in the type of a screw, also referred to as a worm, meshes with a worm gear. These gears are usually made from bronze and the worms are metal or stainless steel.
While worm gears are 
similar to a spur gear, the worm gearboxes are considerably smaller than other gear reduction boxes. A principal benefit of worm gear reducers is usually that they create an output that is 90° from the input and can be used to transmit higher torque or decrease rotational speed. Most often, a worm gearbox provides right hand threads; to change the path of the output, a left-hand thread worm gearbox is required.
At times a motor’s capability could be limited to the point where it needs gearing. As servo producers develop more powerful motors that can muscle applications through more difficult moves and create higher torques and speeds, these motors require gearheads add up to the task.